- Latest V5.0.3 VVDI MB BGA Tool
- Frequently update for more and more functions
- Now support all key lost : W210, w204, w207,W166, W246, W212, W212(old), W230, some W216, W164 2009-, W164/W251 2004-2008 and some others
- Mainly used for key reading and writing,EIS tools,password calculation,key file preparing,ESL tools,ECU/Gearbox renew and many special functions
vvdi mb + Mini key tool in 1099 usd
If You have VVDI2(Vag 4th and 5th and bmw obd and cas4 already activated),
Pls offer SN of vvdi2, we will active followings freely:
48 copy by OBDII
96bit 48 calculation activation
Toyota H chip (We will tell you how to activate freely)
Original Xhorse VVDI MB BGA Tool Key Programmer
Require firmware V5.0.1
Latest version VVDI MB Software V5.0.3（2019-10-21）
V5.0.3 VVDI MB Download Link
Now support all key lost : W166, W197, W212, W218, W246, W206, W210,w204, w207,W166,W203, W463, W639, W246, W212, W212(old),some W216, W164 2009-
,W164,W221, W215, W220, W230, W164/W251 04-08
and some others.
Only when calculate the password, VVDI MB needs 1 token (for all key lost, needs 2 tokens). Other functions are free to use.
If you offer serial number of CONDOR XC-MINI
or CONDOR XC-007, you can buy VVDI MB in 1200 USD and your VVDI MB will has 1 free token per day.
Pls contact skype: VVDIfactory.com
or Email: email@example.com
If you buy CONDOR XC-002
, your VVDI MB can has 1 free token everyday. If you have both condor XC-mini and XC002, your VVDI MB can has 2 free tokens per day
VVDI MB Tool Functions
Tokens for VVDI MB
Combine VVDI MB and VVDI2
VVDI MB Update Log
Supported key types
How to update VVDI MB software & firmware
VVDI MB Package List
VVDI MB Optional Adapters
VVDI MB Customer Review
Xhorse VVDI MB BGA TOOL Function Introduction:
1.Read write key
Identification key, IR read & write BE key
Red V51,V57 version's key password by NEC adapter
Read activate blank BGA(OCF4)key,
key current Hash(repair)
Renew, write into the used NEC KEY
Write smart key ect.
OBD read and calculate all(FBS3) can protocol EIS password
support BGA Key, NEC Key,V51,V57 version password calculation
support all key lost W164,W216,W166,W211,W212,W246,W212(OLD),W204,W207 ECT
online calculation key password,work fast.
OBD(K line) read data, renew ESL, replace ESL(no need to renew EIS)
check ESL damage, repair W204 ESL
support OBD repair KM:W204,W207,W211,W251,W154,W212,W221,W216,W166,W172,W232,W205 etc.
Support reading & writing gateway EEPROM and Flash:W211,W164,W204,W207,W212,W221,W216 etc.
Read & write EIS by OBD or IR,OBD auto detect, access to W164,W209,W211 without gateway
read the old Motorola EIS (K-Line)'s password
renew EIS, replace EIS, enable key, disable key, personalize W204 ESL
test EIS status, working key etc.
6.Prepare key File
Online generate V11,V41,V51 version's key file
support Motorola EIS EEPROM file, with high efficiency, 100% successfully generate
Support renew ECU, gearbox and ISM, write VIN, personalized etc.
8. Unlock ELV function will be released soon.
9. Renew other control modules function will support soon
Tokens need for VVDI MB Tool:
1.For W166, W212, W246, W212(old), W204, W207, W216, W164 2009-
all key lost,need two tokens when calculate successfully
2.For W164,W164 2009-,W166, 197, 212, 218, 246,W169, 209, 211,W172, 204, 207, 212(old),W216,W221,W639 2009-
add key, one token/every calculation
1 Token for VVDI MB
5 Tokens for VVDI MB
1 Year unlimited tokens for VVDI MB
How to combine VVDI MB Tool and VVDI2 in Xhorse App?
Run upgrade kit, device connect to PC by USB cable, read device,
Select'Binding',customer will get QR code automatically,
Login Xhorse APP, enter 'Account'--‘Combine device’,
Then scan the QR code to combine to account.
Latest version V5.0.3（2019-10-21）
** You need update firmware V5.0.1, software V5.0.3!!! ***
*** Lower version will stop online work from November 2019!!! ***
1. Bugfix for onlince calculate erase password
Software version V5.0.2（2019-09-19）
2. Bugfix for W164 (-2009) all key lost diagram
*** Require firmware V5.0.1
===== BENZ V5.0.2 =====
1. This update require update firmware V5.0.1
2. Bugfix for read BE key via IR
3. Bugfix for read ISM
Software version V5.0.1（2019-09-09）
1. Password calculation: Improvement for W169 password calculation while all key lost
2. Password calculation: Improvement for the all key lost diagram
3. Password calculation: Improvement for the online calculation interface
4. Add FBS4 disable key function (Special function->FBS4 disable key)- Support W166/W205/W213/W218/W222/W246 type
Support Key Types Display:
Model Support IR/OBD:
If you have any problem, please feel free to contact us.Contact Information:Skype: VVDIfactory.comWhatsapp
W164, W164 2009+
A166, W197,W212, W218, A246
A169, W209, W211
W172, W204, A207
W204, W207, W212 only by dump
NEW!—W204, W207 via infrared ALL KEYS LOST option
W209 only by dump
Keys version supported:
v03, v06, v08
v05, v07, v09
What keys/remotes are supported?
705 Moto 1997-2000
How to update VVDI MB Software & Firmware?
This function require internet support
Use “Menu ->Update Online->Software Update” to obtain VVDI-MB TOOL latest software version, the software version require firmware version etc.
Press Download Link will download the latest software
If there’s no display for software version, shutdown your firewall and antivirus programs, try again.
Update firmware steps:
1) Connect VVDI – MB TOOL to PC with USB cable
2) Choose VVDI – MB TOOL firmware version from Firmware List
3) Press button Update Online, wait the progress end
4) If failed to get firmware list or get something like "communicate with server error!" while update your device, close antivirus and firewall programs, try again. Change your internet provider once failed again
5) DON’T shutdown your PC or disconnect USB cable while update device
1. VVDI-MB TOOL device
2. IR adaptor
3. USB cable
4. NEC adaptor 1
5. NEC adaptor 2
6. NEC adaptor base PCB
7. K Line in OBD line
8. OBD line
VVDI MB Optional Adapters & Accessories:
VVDI-MB NEC Key Adaptor
EIS/EL Test Line Cables
VVDI MB Power Adapter
ELV Emulator for Benz 204 207 212
VVDI MB NEC ELV Adaptor
VVDI MB IR Reader BENZ Infrared Adapter
Benz EZS EIS ELV ESL Dash Gateway Full Testing Device
Benz ECU Renew Cable and Adapter
Benz EIS ELV Test cables 5-in-1
VVDI BE Key Pro
Feedback from customer:
I try to collect list of OK and K.O. experiences with IR pass reading with VVDI BGA TOOL
W210: EIS/EZS A208.545.01.08 - MCU ??? -read PSW IR - not successful
W210: EIS/EZS A210.545.02.08 - MCU 1D69J - read PSW IR - not successful
W210: EIS/EZS A210.545.03.08 - MCU 1D69J - read PSW IR - not successful
W210: EIS/EZS A210.545.00.08 - MCU 0D69J - read PSW IR - not successful
W215: EIS/EZS A215.545.00.08 - MCU 0D69J - read PSW IR - not successful
W215: EIS/EZS A215.545.08.08 - MCU 1L85D - read PSW IR - not successful
W203: EIS/EZS A203.545.05.08 - MCU ??? - read PSW IR - OK
W203: EIS/EZS A203.545.05.08 - MCU 1J35D - read PSW - OK
W203: EIS/EZS A209.545.09.08 - MCU 1L85D - read PSW IR - not successful
W220: EIS/EZS A215.545.02.08 - MCU ??? - read PSW IR - OK
W220:EIS/EZS A215.545.00.08 - MCU 1D69J read PSW IR - not successfulW639: EIS/EZS A639.545.05.08 - MCU 2x 1L02Y - read PSW IR - not successful
W639: EIS/EZS A639.545.09.08 - MCU 0L01Y - read PSW IR/OBD - not successful
I Can guarantee it will not read ANY WITH HC05
1D69J/0D69J cannot be read by IR alone - A calculation with kline is possible.
read a w203 A203.545.05.08 with mask 1J35d password ok
W203 IES 203 545 05 08 read PSW IR OK
W 220 IES 215 545 02 08 read PSW IR – OK
Only support parts of HC05, HC08 motorola eis(K line),if cannot support will show error, need to remove eis get eeprom. we have tested W215 ok, but not
means all W215 can support.in fact only support parts of this type.
please refer to change W204 esl steps:
ESL:Clear TP, Renew ESL(need erase password)
EIS:Renew EIS(need password & erase password)
Write EIS data back,then Personalize W204ESL
: +86 13559259147
VVDI MB BGA Update Information
suport all key lost?
: Now support all key lost : w204, w207,W166, W246, W212, W212(old),some W216, W164 2009-
I test read data with obd2 210 k line working and 204 car read with obd 2 ,but 211 not read with obd2 cable connect
pin 1 : ESL 1
pin 2 : GND
pin 3 : +12V (30)
pin 5 : CAN L (White)
pin 6 : CAN H (Green)
pin 7 : CAN L
pin 8 : CAN H
Can any one test?
A:Read eis via obd for W164, W169, W211, W209, require gateway connected
: I bought EIS W221 lock with a key from the lock from one machine. I have read the PSW. I will make a complete loss of W221 key in the future?
Describe step by step procedure
: you have uesd/2nd-hand EIS with working key,you can do like this for W221 all key lost
1.read all key lost EIS data-> save EIS data
2.read used EIS data enter password,get erase password->renew used EIS.
3.load step1 EIS data to renewed EIS with password->write EIS data
4.load EIS data(with key password)->prepare key file
5.input new key to device IR reader->load key file->write
6.insert new key to EIS->EIS will learn the new key->key learn success
by the way,if your all key lost W221 is motorola EIS,not need to change EIS,remove eis get eeprom by programmer(VVDI PROG).
then load eeprom to VVDI MB TOOL prepare key file.
: I have a w204 All key lost and i program a new EIS with VVDI, the ignition doesn't come on or crank, but the steering can lock and unlock. can someone guide me what to do?
: about W204 all key lost(change new EIS),refer to following steps,maybe helpful:
1.Read EIS data via obd,then Save EIS data
2.adapt ESL:Read ESL data->Get Erase Password->Renew ESL
3.Change new EIS, Load EIS data(step1)->write Key Password(enter manually and at random)->Write EIS data
4.Personalize W204 ESL
5.Load EIS data(with Key Password)->Prepare Key File
6.Input new Key to device IR reader->Load Key file->write
7.Insert new Key to EIS->EIS will learn the new key->key learn success
First time today it took much longer than 8 hours to Unlock NEC.
Now I cannot personalize this ESL back because it is just not calculating key password. I have working key but it keeps failing to Calculate password. I have done about 6 or 7 times already.
Is there some problem in this V2.1.7? Or is the server having issues?
All sorted out. All done by VVDI but it took so many times to calculate password. Had to do aqcuisition maybe 8 times or so. The NEC is also unlocked. Then wrote ESL and personalised and ll is working fine. Customer will take it over the weekend to fit as the car is more than 500km away.
If they can see why recently is the VVDI suffering with password calculation on W204.
solution :about 8 times online calculation,the point is data acquisition,each time if acquisition without valid data means need one more time again.
Q:Could anyone help me with bench test for w906? I can't find cable for this model.
A:no need buy any cables for working via IR connect just 4 wires for working OBD need connect parallel any diagnostic to CAN and open EZS for testing connect emulator or ELV.
Q:Use VVDI MB read S221 ISM Password successfully, but after click renew ISM,it shows "ISM-164 270 03 52(Siemens,VDO)"
A:For Renw ISM ECU function support list is much less,if after several time still failed, it may not support at present, please except future update. Thanks.
Q:What is the password of VVDI MB Tool?after i download it,extract it,it asks for password.
A:The password is:123456.Same like VVDI Prog,VVDI2.
Q:VVDI MB Tool standard version incudes tokens or not?
A:VVDI MB Tool does not includes the tokens.If you have condor xc-mini or condor xc-007,bind them together you can get one token free everyday.Or you need to purchase extra tokens.
Q:Can i use MBE Engineering to program Xhorse Emulator?
Q:NO,use VVDI MB to program xhorse Emulator.
Q:How to connect VVDI MB Tool for writing diagram function?can i use VVDI MB Tool to copy old ecu data to new ecu?
A:If it supports the function,it will show detailed steps.
Q:How to use VVDI Benz to read data?
A:Usually,it can be read by OBD way.Sometimes,needs to read from EIS.
Q:Can i use VVDI MB TOOL to renew BGA keys?How can i get the key password?
A:You can get the password from EIS data and key data calculate online.But BGA key does not support renew at present.
Q:Will it support 2016 FBS3 keys?
A:No,it can not support at present.
Q:How can i get the erase password for EIS?
A:It the EIS support renew,it will show the erase password.
Q:From the manual,it shows:Support renew EIS, make 2nd hand EIS to new one (online).What is the online meaning?
Q: How to use VVDI MB BGA Tool to Read Write Key?
A:It means you need to use VVDI MB Tool with internet.
Q:When i try to use password calculation to get key password,but it shows "pay for password culculation before update",how can i do?
A:For password calculation function need tokens,if you do not have free tokens,you need to buy VVDI MB Tool Password Tokens.
Q:How many Password Calculation Token will be used everytime?One time one token?
A:If all key lost,will need 2 tokens.Sometimes,the key is different,the token times may be different.
Q:When i try to use VVDI MB,but it shows Cannot connect to server,connection with the server could not be established,how to solve it?
A:Vvdi Mb Bga tool Server Update which happened 11:00 PM China time, server was updated successfully all OK.Please try later.Thanks.
Q:Will VVDI mb bga tool renew Mercedes 7G gearbox 7G TCU 722.8?
A:Yes. VVDI MB can renew MB 7G transmission.
Q:Today i had W210 2001 for key.Owner had one working key.VVDI MB tool try to read via IR and OBD password on car,unsuccesfull.
Tried to read via IR and OBD on desk unsuccesfull.
A:Remove 705 mcu on ETL and generate keys NoImmo online all ok.
Read Write Key support read key basic information, write key file, renew/write NEC key
(Support Keyless Go). BE keys can read password directly via IR, renew BE key, write new key file to BE key
NEC adaptor support v51, v57 key password
Support read key basic information: SSID, counter, remain times, usetimes, key number, status, version, mark values etc
Key version is BE,support read password and key eeprom stored in BE key,write new key file to make a working key, renew used BE key to new one etc
If working key is BE version, you can read password from key directly, no need read password from EIS
Write key file to new original keys or erased keys via IR
Write mark values:
Only BE key support, you can write information for yourself
Copy key password:
You can copy the password to clipboard after success read key password
Repair key via IR:
When identification key, you can only get SSID, Status, Version, then you can repair this key via IR
2.NEC Adaptor mode
For NEC v51, v57 version, support read password from working key directly, no need read password from EIS
For all NEC types, you must use “Identification key” to read one time before renew/write key2.
Q:How to place key NEC chip to adaptor via read/write/renew key via NEC adaptor