7935 33 40 41 42 43 44 |
7930 46 |
7930 47 |
7930 4D on board |
7930 45 on board |
7937 46 on board |
7937 47 on board |
4D 60 63 70 80 83 82G 67 |
4E 64 |
4C |
8C |
8A Toyota H/Hyundai |
43 VAG/Honda |
8E Audi/Honda |
T3 Buick Model |
T1/T2/T3 |
Chip Type | Generate | Copy | Write ID |
Temic 11 | new ID11 | Yes | Yes |
Temic 12 | new ID12 | Yes | Yes |
Megamos 13 | new ID13 | Yes | Yes |
PCF7935 | 7935 new/ID33/40/41/42/44/45/73/7930 | Copy ID33/ID42 | No ID |
PCF7936 | New 7936/ID46 | Yes | Yes |
PCF7937E | New ID46 (4E) | Yes | |
PCF7938 | ID47/Honda A/Honda G | - | Yes |
PCF7939 | New ID49/ID49 American Ford/ ID49 Malaysian cars | - | Yes |
PCF7946 | New ID46 | Yes | Yes |
Megamos 48 | New 48/TP22/TP23/TP24/TP25 | Yes | Yes |
Tiris 4C | New 4C/4C all 0/4C all F | Yes | Yes |
Tiris 4D | New 4D/ID60/61/62/63/65/66/67/68/69/70/70B | Yes | Yes |
Tiris 4D (80bit) | New 4D(80bit)/Toyota 72G/ Daihatsu G/ 83/70 | Copy parts of Toyota G/ Daihatsu G/ID70 chips | Yes |
Tiris 4E | New 4E/ID64 | Yes | Yes |
Tiris AES (8A) | New 8A/Toyota H Camry, RAV4, Prado/ Toyota H Corolla | Copy Toyota H chip | Yes |
Temic 8C | New 8C/Ford 8C/Haima 8C/ Proton 8C | Yes | Yes |
Megamos 8E | New 8E | - | Yes |
The Xhorse VVDI super chips have to be reset to reuse them.
How to reset them?
Follow the steps below:
Step 1: Put the VVDI superchip into the keytool and open the xhorse app.
Step 2: Go to keytool and select special functions
Step 3: Select “Set type of VVDI super transponder
Step 4: Scroll down to Reset VVDI super chip. It’s the last option on that page
Step 5: Tap set