[UK/US/RU Ship] V4.9.4 Original Xhorse VVDI PROG VVDI-Prog ECU Programmer Frequently Free Update

Product Description

Original Xhorse VVDI PROG Programmer

Software Version: 4.9.4
Firmware Version:2.1.0

Newest version v4.9.4 software download (2020-05-26)
VVDI Prog 4.9.4 Software Download
password:123456

TOP 6 reasons to get VVDI PROG Programmer

1. Built-in update software: Make VVDIProg firmwareupdatetimely.
2. High-speed USB communication interface: Make software automatically connect.
3. Smart operation mode: possible causes of error will be listed
4. Reserve ports: For future update.
5. Self-test function: Check if the machine works well or not.
6. Power supply: Through USB cable, software will automatically prompt if the external USB power supply is needed

VVDI PROG Language: English, French, Italian, Spanish, Arabic, Cezch, Polish, Portuguese, Russian, Turkish, Chinese

VVDI-Prog programmer can get free BMW ISN read function and NEC, MPC, Infineon etc chip continously update service.




VVDI Prog Programmer Introduction:

VVDI Prog Main Functions
VVDI Prog Latest Software Update
VVDI Prog Cables and Function
VVDI Prog Supported Chip List
VVDI Prog Update Guide
VVDI Prog Adapters List
VVDI Prog Package List


Main Function:

Support R&W lots of chips, include MC9S08 series, MC68HC(9)12series,
MC9S12series, V850series, H8Xseries, R8Cseries, PCF79XXseries and
most eeprom chips etc .
Support chip data verify, checkblank function
Support data file compare function
Support R&W BMW N20, N55 ECU(show ISN directly)
Stable R&W MC9S12XE series chips(5M48H/1N35H/2M53J/3M25J etc.)
Support renew PCF79XX remote, currently support BMW E/F series (Please Note PCF79XX adapter is optional)
Lots of connection diagram


VVDI Prog Update Log:

VVDIPROGlatestsoftwareversionV4.9.4 update

v4.9.4(2020-05-26)
*ThisversionDON’tneedupdate
firmware
+AddVVDIPROGUSERMANUAL4.9.4
versioninDocfolder
+AddR7F701330optionin
<2-MCU->
+AddFENGJUN-7optionin
<5-DASHBOARD->
+AddTOYOTA-RAV4optionin
<5-DASHBOARD->
+AddBAOJUN-310/560AIRBAG
optionin<7-AIRBAG->
+AddT300AIRBAGoptionin
<7-AIRBAG->
+AddNEWVISIONAIRBAGoptionin
<7-AIRBAG->
+AddBAODIANAIRBAGoptionin
<7-AIRBAG->
+AddLYNKCO-AIRBAGoptionin
<7-AIRBAG->
+AddSRS-VW62optionin
<7-AIRBAG->
+AddAUDI-AC-CONTROLLER(R7F701548)
optionin<8-OTHERS->
+AddFRM-E-SERIES-XDT256
optionin<8-OTHERS->
+AddESCORT-BCMoptionin
<8-OTHERS->
+Add8th-SONATA-AC-CONTROLLER
optionin<8-OTHERS->
+AddSKODA-RADIO-STREAM
optionin<8-OTHERS->

VVDIPROGsoftwareversionV4.9.3 update

v4.9.3 (2020-04-29)
* This version DON't need update
firmware
* Fix 93Cxx ERASE BUGs
+ Add VVDI PROG USER MUNUAL 4.9.3
version in Doc folder
+ Add S2943 option
in<1-EEPROM&FLASH->
+ Add S2943(CLIP) option
in<1-EEPROM&FLASH->
+ Add EIZ-W906-9S12XDT384,
EIZ-W906-9S12XDP384(ADAPTER),
EIZ-W906-9S12XDP512,
EIZ-W906-9S12XDP512(ADAPTER)
option in <4-IMMOBILIZER->
+ Add CRAFTER-EZS-9S12XDT384,
CRAFTER-EZS-9S12XDT384(ADAPTER),
CRAFTER-EZS-9S12XDP512,
CRAFTER-EZS-9S12XDP512(ADAPTER)
option in <4-IMMOBILIZER->
+ Add ARRIZO3 option in
<5-DASHBOARD->
+ Add FIAT500 option in
<7-AIRBAG->
+ Add GLC260-ELECTRONIC-TAILGATE-UINT(2016),
V260-STEERING-COLUMN(2016) options in
<8-OTHERS->
+ Add BESTURN B90 CONTROL UNIT-PKE(2015)
option in <8-OTHERS->
+ Add CLIO-HFM-MODULE option in
<8-OTHERS->
+ Add PHAETON-REVERSE-RADAR-UINT(2012)
option in <8-OTHERS->

VVDIPROGsoftwareversionV4.9.2 update

v4.9.2 (2020-03-16)

*ThisversionDON’tneedupdate
firmware
+AddVVDIPROGUSERMANUAL4.9.2
versioninDocfolder
+AddSTM32F405RG,
STM32F405OG,
STM32F405VG,
STM32F405ZG,
STM32F405OE,
STM32F407VE,
STM32F407ZE,
STM32F407IE,
STM32F407IGoptionsin
<2-MCU>->
+AddFRM-E-SERIES-XEQ384-READ,
FRM-E-SERIES-XEQ384-WRITE,
FRM-F-SERIES-XEP100-READ,
FRM-F-SERIES-XEP100-WRITE,
FRM-F-SERIES-XET512-READ,
FRM-F-SERIES-XET512-WRITEoptions
in<8-OTHERS->
+AddENVISION—TAILGATE-COMPUTER
optionsin<8-OTHERS->
+AddPHAETON—TAILGATE-COMPUTER(2012)
optionsin<8-OTHERS->


VVDI Prog Cables and Function:
16Pin LockingSocket
Read the common EEPROOM, note: please insert the chip by following the below picture.

1.3.2 MCU Reflash Cable
Used to program MCU on board



1.3.3 ECU Reflash Cable
Used to program ECU

1.3.4 MC9S12 Reflash Cable
Used to program MC9S12 series chip




Supported chip list

EEPROM

Manufactures	Types	Support	Remark
ATMEL	AT24CXX	R
	AT25XXX	R
	AT93CX6	R
BOSCH	B3XX	R
	B4XX	R
	B5XX	R
	B58XXX	R
CATALYST	CAT24CXX	R
	CAT24WXX	R
	CAT93CX6[A]	R
EXEL	XL[S]24CXX	R
	XL[S]93CX6	R
FAIRCHILD	FM24CXX	R
	NM24CXX	R
	NM93CX6	R
GRUNDIG	GRXX	R
HOLTEK	HT93CX6	R
MICROCHIP	24AAXX	R
	24[L]CXX	R
	93[L]CX6	R
	93AAX6	R
MITSUBISHI	M6M800X1	R
SEIKO	S-24CXX	R
	S-93CX6	R
ST	D80/D160	R	Canerasethefirst32bytes
	M35080	R	Canerasethefirst32bytes
NEC	M24CXX	R
ST	ST24CXX	R
	ST24EXX	R
	ST24WXX	R
	ST25CXX	R
	ST25EXX	R
	ST95P0X	R

Note: R means the type is supported, £ means the type will be supported in the future.

MCU

Manufactures	Types	Support	Remark
MOTOROLA	MC9S12XEP	R	CanautomaticallydetermineD-FLASH/EEEspace
	MC9S12XA	R
	MC9S12XB	R
	MC9S12XD	R
	MC9S12XDT	R
	MC9S12XDP	R
	MC9S12XDQ	R
	MC9S12DG	R
	MC9S12DT	R
	MC9S12P	R
	MC9S12H	R
	MC9S12HY	£
	MC9S12HA	£
	MC9S12HZ	£
	MC9S12XHZ	£
	MC9S12B	£
	MC9S12GC	£
	MC9S12XS	£
	MC9S12K	£
	MC9S12Q	£
	MC9S12C	£
	MC9S12P	£
	MC9HC(9)08	£
ATMEL	ATTINY	£
	ATMEGEA	£
NEC	uPD70F	£
ST	TMS370	£

Note: R means the type is supported, £ means the type will be supported in the future.

ECU

Manufactures	Types	Support	Remark
VAG	MED17.1-TC1796	£
	MED17.11-TC1796	£
	VAGMEG17.5-TC1766	£
	VAGMED17.5.1-TC1796	£
	VAGMED17.5.2-TC1767	£
	VAGMED17.5.5-TC1766	£
	VAGMED17.5.20-TC1766	£
	VAGEDC17CP14/CP20-TC1796	£
	VAGEDC17CP04-TC1796	£
	VAGEDC17C46-TC1767	£
	VAGEDC17CP24-TC1796	£
	VAGEDC17CP44-TC1797	£
	VAGEDC17U01-TC1766	£
	VAGEDC17U05-TC1796	£
	VAG/PorscheSiemensContinentalSDI3- TC1796	£
BMW	MEVD172(N55)	R
	MEVD172P(N20)	R
	MEVD172G(N55)	R
	MEVD172S(N55)	R
	MEVD1724(N20)	R
	MEVD1725(N13)	R
	MEVD1726(N55)	R
	MEVD1729(N20)	R
	MEVD1728(N63/S63)	R

How to Update VVDI-Prog Software & Firmware?

Software Update
You can get from our "Download" page or in description,we always list out download link.
Get in VVDI prog software:Click the "Upgrade" button enter the upgrade interface, show as following

Firware:
Please note: Firmware is necessary only when you are told to update. Press "Start Firmware Upgrade" button.

Package List:

1pc x Programmer multiplexer
1pc x Square USB cable
1pc x SOP16 test socket
1pc x 16pin converter (Support SOP/SOT/SSOP)
1pc x MCU reflash cable
1pc x ECU reflash cable
1pc x MC9S12 reflash cable (Used to program MC9S12 series chip)



VVDI Prog Optional Adapters

VVDIproghas severaloptional adapters,here is the list:

Adapter Item No.	Adapter Name	Product Pic.	Price (USD)
SO453	Benz EIS /EZS Adapter Kit Full Set 10pcs		349
SO370	TB28FXXX adapter		44.99
SO363	PCF79XX adapter		44.99
SK232	M35080/D80 adapter		40
SK230	EWS3 Adapter		40
SK234	EWS4 Adapter		42.99
SK233	EEPROM Clip adapter		50
SO459	TMS370 adapter		39.99
SO496	Land rover KVM Clip adapter		55
SO451	MC68HC05X32 Adapter		29.99
SO452	MC68HC05BX Adapter		29.99
SO463	PQFP80 Flash Adapter		40
SO450	AM29FxxxB (SOP44)		39.99
SA1864	35160DW Chip		17.99

The new VVDI Prog Bosch ECU Adapter is used to read ISN from BMW ECU N20 N55 B38 etc. Without damaging the ECU shell.

The new BMW CAS4 adapter is used to read BMW 1N35H 5M48HBMW CAS4 No Removing Components


The new BMW FEM BDC 8-PIN adapter is used to read and write Immo 95128/95256 & dash 35080/35160 No Soldering

Land Rover KVM Adapter for VVDI Pro

BMW FRM Reading Cable for Xhorse VVDI Prog without Soldering

If you have any problem, please feel free to contact us.

Contact Information:

Skype: VVDIfactory.com