How to Use Xhorse XDNP30 ECU Adapter with VVDI Key Tool Plus?
Matched product:
Auto 4% OFF Xhorse XDNP30 BOSH ECU Adapter and Cables for VVDI Key Tool Plus and Mini Prog
US$109.00
- Item No. HKSE154
- Free Shipping
Xhorse Adapter for BMW ECU ISN Reading without soldering.
Support N55 N20 B38 B48 and more than 80% F Series type.
Support N55 N20 B38 B48 and more than 80% F Series type.
How to use Xhorse XDNP30 BOSH ECU Adapter and Cables with VVDI Key Tool Plus or Mini Prog to read BMW ECU ISN without soldering, support N55, N20, B38, B48 and more than 80% F series type.
Procedure
Step1. Connect XDNP30 Adapter with Adapter Cable & ECU, plug the other side of cable into Key Tool Plus interface;
Step2. Supply 12V power to the BOSH ECU Adapter;
Step3. Turn on Key Tool Plus, select vehicle and ECU type to check connection diagram.
(Prog >> Read ECU with CAN >> …)
Then you can go on reading ECU data.
Have the XDNP30 ECU Adapter and Cables, no longer need to solder before programming. That will save much time to improve work efficiency.