Xhorse solder-free adapters set for VVDI MINI PROG, VVDI Prog and KEY TOOL PLUS for programming without soldering. This set includes solder-free adapters for BMW, Porsche, Landrover, Volvo, and others.
Support 2013-2019 A4L, A5, Q5, A6L, A7, A8 BCM2 immo data reading without original key ID.
Compatible with xhorse key tool plus and vvdi2 + vvdi prog.
Support exchange BCM2 function in future updates
A new set of 10 types Xhorse EZS/EIS adapters for Benz EIS/ EZS W164, W169, W203, W209, W211, W215, W639, specially designed for quick out jobs, no soldering required, perfect for beginners and out jobs work team.
Back in stock. Free Express Shipping
4.5KG
No need to cut wire or lift pin to read MQB 48/MQB 49/5C dashboards.
For Multi Prog only.
This is an optional add-on adapter for the Mini Prog and Key Tool Plus programming devices. It is used to read BMW CAS3/CAS3+ data without soldering.
With this adapter, there's no need to purchase new adapters specially designed for KEY TOOL PLUS, MINI PROG and Multi Prog. These adapters all work with different tools from Xhorse, but now together with this Multi-function Adapter,
Supports soldering to read and write SOP44 package and TSOP48 package parallel FLASH chips, such as AM29FXXX, M29FXXX, TB28FXXX series.
GODIAG G-V ECU Cable is used to connect Xhorse MULTI PROG with GT107 or GT107+ GPT BENCH BOOT to read and write data on VAG gearbox TCU and engine ECU, clone ECU.
GODIAG G-V ECU Cable is used to connect Xhorse MULTI PROG with GT107 or GT107+ GPT BENCH BOOT to read and write data on VAG gearbox TCU DQ200 DQ250 etc and engine ECU, clone ECU.
Supports reading and writing common 8-pin chip data.
Xhorse XDNP14 DB15-DB25 BMW EWS4 adapter is used to connect VVDI Prog, Key Tool Plus, Mini Prog to the BMW EWS4 adapter to read ESW4 data without soldering.
Supports solder-free reading and writing SOP44 packaged parallel FLASH chips, such as AM29FXXX, M29FXXX, TB28FXXX series.
GODIAG ECU GPT Boot AD programming adapter can help you read and write ECU data without disassembling the ECU using the OBD2 Bench or GTP Bench method or disassembling the ECU and using the Boot method. This product is equipped with a short-circuit-proof BOOT resistance board connection line to protect the ECU. You can use it with J2534 devices and PCMFLash software.
Package contains BMW adapter for BMW CAS3/CAS3+, CAS4/CAS4+, FRM, DB15-DB25 adapter, D80/35080 to work with Mini prog and key tool plus pad.
Xhorse XDNP16 KVM Solder Free Adapter Special for Land Rover.
Read BMW CAS4 CAS4+ Immo data without soldering
Works with Mini Prog, Multi Prog, VVDI Prog and Key Tool Plus
Supports solder-free reading and writing TSOP48 packaged parallel FLASH chips, such as SST36VFXXX, AT49BVXXX, W19BXXX series.
Xhorse XDNPP17 Solder-free adapter for Porsche BCM data reading without soldering, work with Xhorse MINI PROG and KEY TOOL PLUS.
The Xhorse VVDI Porsche BCM2 adapter allows you to perform Porsche all lost keys and aftermarket key programming with no soldering techniques required.
Xhorse XDNP18 Solder-Free Adapter for BMW FRM
work with MINI PROG, KeyTool Plus, VVDI Prog. For VVDI Prog you need use with DB25 DB15 cable.