- Clamp M3 works with Condor XC-Mini, Condor XC-Mini Plus, and Dolphin XP-005 key cutting machines for cutting Ford FO21 Tibbe and Citroen SX9 key blade.
We have Warehouses in EU CZ,US,UK,China,Russia,Belgium. No customs fees.If you have any problems, please feel free to contact us.Contact Information:Skype: VVDIfactory.com
Xhorse CONDOR Ford M3 Fixture for Ford TIBBE Key Blade
Including 2 parts: Ford FO21 & Citroen SX9
You are able to decode and cut it successfully without having to calibrate the M3 clamp.
Ford tibbe is 6 cuts, some Jaguar is 6 cuts some is 8 cuts.
Cut by bitting, FO21 gives an option for 6 cuts. S30 is shorter 6 cuts.
S32 is for the 8 cut jaguar keys.
8 cuts on a xhorse dolphin.
1pc x Xhorse M3 Jaw
How to Cut Ford FO21 Tibble key with Xhorse Condor or Dolphin M3 Jaw?
Mount M3 clamp, There is a screw, lock it down
Run xhorse app
Select Cut by bitting-Ford FO21
It prompts to use M3 clamp
We get the cutting number 341242
Processing key cutting
it tells us to rotate it to the next position
We will go one click over continue
basically cutting these keys you are just cutting a quarter of them at a time
it tell us go to poosition 2 over here on the b side of it
rotate it to the next position again
now it basically turns it all the way upside down so we are going to cut the other half of the key
Follow app prompts to cut the other half of key
the cutting process to 100 percent
just rotate it back to where we can see our grub screw
Unscrew and remove the key
and notice here this leaves a lot of burrs I use the 1.5 millimeter cutter