Program BMW CAS2 All Keys Lost with Xhorse VVDI2 and CAS Plug on Bench
Matched product:
Xhorse CAS Plug for VVDI2 BMW, VVDI2 Full and VVDI BIMTool Pro (CAS1-CAS3 on Bench and Add Key BMW EWS)
- Item No. SK108-BD
- Free Shipping
1. It connects to device OBDII port,
2. It is used for EWS, EWS 2, 7 Series CAS1/CAS2 plug and CAS3/CAS3+ plug.
3. By using CAS Plug, you can connect CAN LINE manually, support 12V.
This is a BMW Series 1 E87 year 2005 CAS2 immo system. Key programming is successfully done by xhorse vvdi2 and CAS plug on bench (also possible by OBD). Key cutting with xhorse condor xc-mini plus by mechanical key code.
Key info.
ID46 Hitag PCF7953
remote key, frequency 868MHz
Remove CAS2 module under the instrument on the driver side
Connect CAS2 module with vvdi2 bmw and xhorse CAS plug
Run VVDI2 software, select BMW function
Press Connect and detect CAS info
Get key cutting code
Press Get key info and select all keys lost
the dealer key should be taken away from ignition switch, if key is keyless, more it out of car
save key info
select an unused key position
insert key to be programmed into vvdi2 bmw
press Prepare dealer key with programmer
vvdi2 ask if key has keyless, press No
make key success and locked.
if cannot start engine, use Add key function add the dealer key to CAS system
install CAS2 module back to the vehicle
Then cut key with xhorse condor xc-mini plus key cutting machine
Test the key and remote control
Done.