Xhorse VVDI MB Universal Benz FBS3 Smart key + 3 Buttons Key Shell
- Mercedes FBS3 Proximity PCB - 1 pcs
- Shell - 1 pcs
This PCB works as a replacement for Mercedes IR Prox Keys in E Class, C Class, S Class, ML Series, and GL Series with the EIS Modules listed below from 2009 to 2015 as long as they are FSB3 Systems and do not have the Push To Start Button on the vehicle's Shift Lever. If the vehicle you are working with has the Push To Start Button on the Shift Lever, there is not currently a replacement Prox Key available for these vehicles.
- This PCB Supports Manual Starting, Keyless Entry, and PTS (Push To Start) Functions
- The PCB works with FBS3 Systems using these EIS Modules: W204, W207, W212, W164, W166, W221
- 315 Mhz and 433 MHz Frequency Compatibility (Set In VVDI MB/Key Tool Plus Software Or By Component Change)
- A working battery is not required for IR Key Information writing
- Compatible with multi Benz key programming tools
- With free 200 bonus points (can be exchanged to 1 token )
PLEASE NOTE: shell comes separately from PCB, assembly will be required
C-class W204, W207
S-class W221, W216
How to exchange FBS3 smart key frequency between 315MHz and 433MH?
If you have VVDI MB Tool, it is easy to change frequency in vvdi mb software (update software to latest version)
Select Other Function-> Set key remote frequency/ Update MB smart key
You can set frequency between 315MHz and 433MHz
If without VVDI MB, you can change FBS3 keylessgo smart key frequency manually by soldering / desoldering the FRE resistor (marked red in picture below)
How to collect points and exchange BGA token?
1. Collect points
2. Bond VVDI MB in your Xhorse APP
3. Run APP to scan QR code
Due to the design flaws of a few OEM shells, pressing the button forcefully may cause a short circuit on the circuit board, resulting in battery leakage.
To avoid this problem, it is recommended to put insulating tape on the area shown in the figure below.
We have Warehouse in EU CZ,US,UK,China,Russia,BelgiumIf you have any problem, please feel free to contact us.Contact Information:Skype: VVDIfactory.com
I tried today to make a keyless key on a Mercedes benz s350 2009 with xhorse vvdi mb and FBS3 key. but the keyless function does not work, error: The key is not recognized.
At the same time, only keyless does not work (The central lock is working by inserting the key into the ignition lock, the car starts, the doors close/open if you press the buttons). Keyless go did not!!!
Change FBS3 key frequency does not work. It is not a problem of frequency.
Neither Xhorse nor CG keys will work for older non-BGA cars before 2009.
You need original for those.
The keyless function will not work if the original key has two batteries, you need to use the original factory key to prepare new key.
If original key has 2 batteries, you can't program keyless key to car. If 1 battery which is BGA key, you can program xhorse or cgdi keyless mb key.
If you generate OEM key, not Xhorse key but had problem with OEM key keyless function, check following tips:
1). If the original remote with only one battery, the OEM key you use should be only one battery as well.
2) You use an used key, can’t guarantee if was damaged during the renewal process.
3). You must select V41 file to make original remote.