Insert original key into left coil
Select Transponder Clone-> ID46 HITAG2->Use wireless remote for sniff data
Insert vvdi wireless remote key into left coil
Close original and wireless remote, insert original key into ignition to sniff data
Install battery and put acquisition remote near vehicle ignition coil, switch on ignition 1 time when put remote back to the VVDI Key Tool induction coil, press OK to read data
Insert original key into left coil and press OK to start the calculation. Don’t move the key during the progress.
Take out the car key and insert TPX3 or SN2 wireless key then press OK to clone the transponder.
Clone success. Press OK to clone next.