2011 Chevy Captiva all key lost by Xhorse VVDI Key Tool Max and Mini OBD Tool

Problem: Customer lost his 2011 Chevy Captiva working remote, the new remote cannot start (security light doesn’t go off)


Solution: Program new remote using VVDI Key Tool Max with Mini OBD Tool

Prepare all the goods required firstly.



Plug Mini OBD Tool into the vehicle OBD port
Connect Key Tool Max with Mini OBD via Bluetooth

1.Program chip
Enter IMMO Programming menu
Select Chevrolet-> Captiva-> IMMO system-> Non-smart-> Type 1

Read the function description (All keys lost)

All keys will be deleted
Start execution-> All keys lost

Turn ignition switch to ON
Need at least 2 keys to perform this function! Or it can not start! Confirm to continue

Wait for 12 minutes…
The security light is steady

After wait for about 11 minutes, the security light goes off
The follow the instructions to operate step by step
1).Turn off ignition switch
2).Turn on ignition switch with key 1 for 5 seconds until security light goes off, then turn off and remove
3).Turn on ignition switch with key2 for 5 seconds until security light goes off, then turn off and remove
4).If need to add more keys, please repeat step 3
Finally, test all keys, and all can start the car normally
After programming chip, need to program remote

2.Program remote
Go back to remote system (Chevrolet-> Captiva-> Remote system)

Select Type1
Read the corresponding function description
Start execution
Select Add remotes

Turn ignition switch on
Press both Lock and Unlock buttons of adding remotes for 10 seconds

It will sound response 2 times
Check if the programmed key is valid
Match remote successfully

Test the remote can use perfectly
Done!