Xhorse VVDI2 BMW Full Authorization Key Programmer With BMW OBD+CAS4+FEM

Product Description

Xhorse VVDI2 BMW OBD+ CAS4+FEM/BDC License

VVDI2 BMW comes with Basic Function and BMW OBD Function, PSA Free update, VVDI2 BMW software and firmware both support update online, and VVDI2 BMW can do CAS1-CAS4+,FEM.

To activate BMW OBD+ CAS4+FEM/BDC function, just 150 USD

Apply to VVDI2 Basic version (SV86-C) or higher

VVDI2 CAS4/CAS4+ Via OBD free Update
Support CAS4/CAS4+(XEP100 series, 5M48H/1N35H) type with OBDII
1). Support all CAS4/CAS4+ encrypt version with 5M48H/1N35H chip
2). Support prepares dealer key with OBD (We suggest use ignition switch prepare key)
3). Support reset mileage in CAS4 module

VVDI2 BMW Authorization:
√ (VB-01) BMW CAS4 Function
√ (VB-02) BMW CAS4 Function
√ (VB-03) BMW FEM Function
√ (VK-01) transponder key programmer
√ (VJ-01) Passthru J2534

VVDI2 BMW Functions:
EEPROM/KM/Synchronization Codes (OBD)
Read EEPROM / Write EEPROM
Read KM / Write KM
Synchronize DME-CAS, CAS-ELV
 
Key Learn
Get Key Info
Write Key Info
Load Key Info / Save Key Info
Prepare dealer key with programmer
Prepare dealer key with ignition switch
Add key
Program Key Info
Repair Keyless Key
Enable Key / Disable Key
Clear DTC / Clear Shadow
 
File Make Key
EWS1/EWS2/EWS3/EWS4
CAS1/CAS2/CAS3/CAS3+/CAS4/CAS4+
 
Unlock Key
Unlock with key info file
Unlock with CAS1/CAS2/CAS3/CAS3+ EEPROM
 
File Change KM
EWS3/EWS4
CAS1/CAS2/CAS3/CAS3+ CAS4
Cluster (E Series): M35080 EEPROM dump
Cluster (F Series)

CAS Repair
CAS1(0K50E) OBDII Repair
ISTAP4* Version OBDII Repair

BMW FEM/BDC:
1. FEM/BDC support emergency switch ON: FEM/BDC Key Learn->Emergency switch ON
2. Support read ISN from original key (even key was disabled): FEM/BDC Key Learn->Read ISN from original key
3. FEM/BDC supports close/open transport mode: FEM/BDC Key Learn->Exchange FEM/BDC->Close/Open transport mode
4. !!!New Function: ECU/CAS ISN!!! (Menu->Key Learn->ECU/CAS ISN)
Support OBD exchange used or new ECU module, no need open PCB
Support OBD exchange used CAS3+/ISTAP module, no need open PCB
Support exchange used or new ECU module with “ECU dump file”
Support exchange used CAS3+/ISTAP, CAS4(1L15Y, 5M48H) with “CAS dump file”
(1). E-Series
(a). OBD read ECU ISN: MSV80, MSV801, MSD80, MSD81, MSD802, MSD812, MSD851
(b). OBD read/write ECU ISN: ME17N45(N45 Tricore), ME17N46(N46 Tricore)
(c). OBD read/write ECU ISN: MEV17_2(N12 Tricore), MED17_2(N14 Tricore), MV1722(N16 Tricore), MVD1722(N18 Tricore), MEVD174K(N20, Tricore), MEVD176K(N55 Tricore), MVD1727(N18 Mini Tricore), MEVD17KW(Tricore)
(d). OBD Read/write CAS ISN: CAS3+(0L15Y, 0M23S), ISTAP version. Encrypt verison require working key support
(e). Support write new ISN to ECU flash dump file, fix checksum: MSV80, MSV801, MSD80, MSD81, MSD802, MSD812, MSD851
(f). Support write new ISN to ECU eeprom dump file, fix checksum: ME17N45(N45 Tricore), ME17N46(N46 Tricore)
(g). Support write new ISN to ECU eeprom dump file, fix checksum: MEV17_2(N12 Tricore), MED17_2(N14 Tricore), MV1722(N16 Tricore), MVD1722(N18 Tricore), MEVD174K(N20, Tricore), MEVD176K(N55 Tricore), MVD1727(N18 Mini Tricore), MEVD17KW(Tricore)
(h). Support write new ISN to CAS3 eeprom dump file, fix checksum: CAS3+(0L15Y, 0M23S), ISTAP version. Encrypt verison require working key support
(2). F-Series(some F-series ECU don’t support read ISN from OBDII)
(a). OBD read/write ECU ISN: MEVD1724 (N20 Tricore), MEVD1725 (N13 Tricore), MEVD172Y(N55 Tricore), X63TU(S63TU, N63TU)
(b). Support write new ISN to CAS4(1L15Y) eeprom dump file, fix checksum: CAS4(1L15Y)
(c). Support write new ISN to CAS4(5M48H) eeprom dump file, fix checksum: CAS4(5M48H). Encrypt verison require working key support
(3). Some function in ECU/CAS ISN require download VVDI2 configuration file: Online Update Tool(v4.9.0)->Menu->Software Update and Update Information->Configuration file Update
5. Support read CAS3+(ISTAP) EEPROM from OBDII(This is not full EEPROM, Support make dealer key, DON’T WRITE this file back to CAS)
6. Bugfix

VVDI2 - BMW FEM/BDC system (function released and available, just no user manual)
Users can refer to following information (3 steps for make keys: get key info->programming FEM/BDC system->make keys)
 
1.support make new key with ignition switch (support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM (cluster require reset manually)
3.support erase key (after erase the key position become blank position)
4.support backup coding
5.support restore coding
 
Notes:
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if 'get key info' the type not support, it will show: customer should use "BMW E-sys software" program FEM/BDC system. then programming FEM/BDC system with VVDI2-BMW
4.when operation on 'programming FEM/BDC system' interface, please don't close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom. (FEM 95128 chip, BDC 95256 chip) usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system, must restore the original eeprom, restore coding. If cannot restore coding or after restore coding assemble FEM/BDC module back to car, but with problem (such as the remote control cannot start the car 
or the car with window problem) please use "BMW E-sys software" coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keeps ringing, please contact technical support for help. Usually operation on FEM/BDC should be ok, just need to programming.
 
We have Warehouses in EU,US,UK,China,Russia,Belgium. No customs fees.
If you need better price, please feel free to contact us.

Skype: VVDIfactory.com