Xhorse Dolphin XP-007 Main Parts and Function


Matched product:

[US/EU Ship No Tax] Xhorse DOLPHIN XP007 XP-007 Manual Key Cutting Machine for Laser, Dimple and Flat Keys

Hot Sale [US/EU Ship No Tax] Xhorse DOLPHIN XP007 XP-007 Manual Key Cutting Machine for Laser, Dimple and Flat Keys

Latest price:US$899.00
US$699.0022% off
  • Item No. SL438
  • Free Shipping
Xhorse Dolphin XP007 is the 3-in-1 key cutting machine for laser, dimple & flat keys.
enough stock in UK/Czech warehouse now
Portable solution, easy to carry
Built-in battery provides longer service life
Xhorse DOLPHIN XP-007 Main Parts With Function Description:

1. Auxiliary handle
xhorse dolphin xp-007 function description 01

2. Main handle
1) Move the handle forward or backward to adjust the height of the cutter and probe. The cutter and probe will go back to its initial height when dropping the handle.
2) Move the handle to set the height of the cutter and probe and lock them by rotating the handle clockwise.
xhorse dolphin xp-007 function description 02

3. Switch
Power switch and speed selection, include OFF, ON, 1, 2 switch position.
1) Power is off when switching to 'OFF'.
2) Power is on when switching to 'ON', the LED light is on and the machine is on standby.
3) The motor is at a low speed of 8000 rpm when switching to '1'
4) The motor is at a high speed of 10000 rpm when switching to '2'.
xhorse dolphin xp-007 function description 03

4. Indicative light for height leveling
xhorse dolphin xp-007 function description 04

1) Needle leveling: For adjusting height indicator light.
Only left side light on, probe height higher than the cutter. Move the micro-adjuster knob clockwise to let probe move down.
Only right side light on, cutter height higher than the probe. Move the micro-adjuster knob counter-clockwise to let probe move up.
Only probe and cutter at the same height, both light on.
2)  Battery status
Full lights on means battery full charge
Only one green light on, means battery low, please recharge on time.
Only one red light on, means battery badly low, please recharge asap
3) CHRG: For charging setting
Charging setting is red means battery low, need to recharge or charging
The charging setting is green means battery full. You can unplug the power cord.
*Notes: If the machine without Li-ion battery pack, plug in the power cord, the battery indicator is green and the charging indicator lights up in green.

5. Micro-adjuster
Micro-adjuster includes micro-adjuster knob and prepositioning switch.
xhorse dolphin xp-007 function description 05
1) Micro-adjuster knob allows precise adjustment to the height of probe, Turn the knob clockwise to move down the probe and counter-clockwise to move up the probe.
2) Prepositioning switch mainly supports setting position in advance, mainly for cutting dimple keys more accuracy, When the prepositioning switch is at 'UP', setting position function disabled, prepositioning switch is at 'Down', setting position function enabled, the probe height is lower than the cutter because of inside spring but it can bounce back to a level same to the cutter, when cutting dimple keys, the probe will be detected the original key center point in advance, cutting keys with more accuracy.

6. Locking knob
xhorse dolphin xp-007 function description 06
1) When the right locking knob is tightened, the working platform is restricted to move at a smaller distance, it will be easy to control the cutting key width.
2) When both locking knobs are tightened, the working platform can only move along Y-axis but not along X-axis, when cutting dimple keys, in case of the platform horizontal shaking because of the cutting.
*Notes: Probe micro-adjuster function for prepositioning function only switch at 'UP' position, or may affect on cutting accuracy

7. Supporting arm
1) The supporting arm with a damping effect, can move up and down.
2) When the machine is in use, move the supporting arm to a proper position where you feel good.

xhorse dolphin xp-007 function description 07
*Notes: When moving the machine, the supporting arm can be moved forward limited to prevent the clamp from shifting.