Then come to VVDIProg Update menu. You are able to check software version (Tip Information) and firmware version (Device Information).
(NOTE: Newest VVDI-Prog does not need to update firmware
Where can I get the latest software?
A: You can get from our "Download" Column or in description,we always list out download link.
When update vvdi prog, always show the error"Communication with the server failed"
A: VVDI Prog just need to update the software, no need to update firmware
About BMW ISN function?which bmw car models does it support?
A: If your BMW car is supported,the ISN will display automatically in the software.
When i try to update,it got error "Unable to find equipment "
A: Please check driver installation and vvdi prog connection,try to update again.
Will VVDI Prog support BMW isn coding function?
A: No,VVDI Prog is used to read chip data,it can support read BMW ISN.
VVDI Prog can do BMW CAS4 or not?
A: Yes, download software and check wiring diagrams.
Didn't clean the pcb mate, of course 12v connected, but i looked under the mag. it seemed that the pins are slightly off! oh well the job is finished , i will check the next one , or buy one to check. thanks mate.
A: Every time need to have some donor pcs on stock….not wait until is needed
When read Benz EIS is OK, but write or verify got error,how can i solve?
A: Please go to setting >>environment, tick off the slection.
VVDI PROG 95640 read OK and write not (write error on the beginning).
A: In this case check the eeprom package BEFORE any operation, bcose the operating voltage is clearly marked
You can check here (sorry for the bad picture it was taken by mobile and enlarged)
First row: S64S
The last digit is "S" = 1.8V-3.6V
You have to adjust the vvdi voltage to the correct value (default is 4.5V)
VVDI Pro sprinter w906 eis reading via new ST. adapter is not working, had to use V1 flash cable to read the eeprom.
A: The connections points on PCB must be sure cleaned before !!!
not only take pcb from eis case and quickly put to EZS adapter and await 100% result in 1 seconds like many other users…
Spent an hour moving it slightly, even tried sprinter 2006- from the drop down menu , but with no luck ,V1 flash cable job at the end.
A: of course work only right choice when use EZS adapter and dont forget to use external +12V power.
When i use the VVDI Prog to read PCF7952 chip, it failed "Chip not connect", what can i do?
A: Please check the connection diagram,and the pins connection.
VVDI Prog Reviews:
1. I did a few tests today and this is what I found out.
It seems that VVDI prog reading speed is dependent on the processor speed of the computer.
CAS3 0L15Y flash read times
Centrino processor @ 1.6ghz Windows XP = 12mins
Core2 Duo processort @ 2.5ghz Windows 7 32 bit = 5 mins
i7 @ 4.4ghz Windows 7 64 bit = 2mins 30 seconds.
Other programmers do not seem to be affected by processor speed at all.
I also would of thought this was a fairly easy question to answer without me doing all the testing
2.Today read Rover CEM success with Last version
It Was HSE 2008 onde motor supercharged.
3. Q: Has anyone had any problems reading CAS 3 with 0L01Y mask. Is it safe to read with VVDI prog.
A: I read it many times ...it’s safe
4. Q: Can vvdi prog erase the first two lines in M35080 M35160 (80D0WQ, 160D0wQ) ?
A: Tested today M35080v and 080d0wq. It erases perfect. Also the first two lines
5. ST 10F269
megan steering power unite
6.Question: I need your advise regarding reading Mask 1M12S secured via Vvdi Prog, if someone read successfully yet or not
Mask 1m12S normally found inside LandRover RangeRover Sport 2016 up KVM RFA module.
Answer: BCM module?
In the 8-OTHER,there is LANDROVER and choose the RFA-V2(secured) to read
RFA should be ok.
Yes i did Successfully.
VVDI PROG vs Xprog-m vs R270 vs Orange5 clone
- faster to clear 35080, 080D0, 160D0 (within 10s)
- more stable than Xprog-m to read MC9S12 series chips
- faster to attack MC9S12series chips
- less error than Orang5 to read some EEPROM that Orange 5 fail to recognize
- with voltage attack function for use
- with CAN bus,K-Line for use
vvdi-prog software windows 10 install
have success of vvdiprog on win 10
make folder c:\VVDI and put all files/folders in there that are in the rar file
also make exeption in antivirus program for that folder... else it will delete vvdi.exe
again, dont forget windows defender!