How to Update Xhorse Dolphin XP005 Firmware and Software


How-to: update Xhorse Dolphin XP005 key cutting machine software/firmware and install driver using Upgrade Kit.

 

Preparation:

Download Xhorse Upgrade Kit  (contact us if new version upgrade kit comes out)

Download Dolphin XP005 Windows x32 x64 Drivers

 

 

Download Upgrade Kit and install setup

Update the Upgrade kit to the latest version

update-condor-dolphin-xp005-1

update-condor-dolphin-xp005-2

update-condor-dolphin-xp005-3

Connect Dolphin key machine with computer via USB cable

update-condor-dolphin-xp005-4

Turn on the Dolphin XP005 machine and connect it with the computer, it will show the BIOS on the screen of Dolphin as below,

dolphin-xp005-bios

Run the upgrade kit and choose ‘Find Device’, it will be show a small window , choose ‘Yes’ and will guide to install the driver

update-condor-dolphin-xp005-5

update-condor-dolphin-xp005-0

Choose the correct driver according to the machine as below, make sure you are shut down all protection before you install the driver, especially for windows 10 system

update-condor-dolphin-xp005-6

You need to download and install Windows driver for Xhorse Dolphin

update-condor-dolphin-xp005-8

update-condor-dolphin-xp005-9

update-condor-dolphin-xp005-10

update-condor-dolphin-xp005-11

update-condor-dolphin-xp005-12

After the driver has been installed, run the ‘Upgrade kit’ and choose ‘Find Device’ again, to see if you can see the device serial number and firmware version, do not chose ‘Upgrade’ until it you can see that , because if you can’t find device ,which means the driver is not been installed, and the machine will be blocked if you update it without driver

update-condor-dolphin-xp005-13

Press “Upgrade” and wait till the procedure completed

update-condor-dolphin-xp005-14

Update succeed.

update-condor-dolphin-xp005-15