How to Engrave a Unique Key Blank with Xhorse Condor Mini Plus II?
Key blank engraving is an optional cutter newly developed for Xhorse Condor XC-Mini Plus II key cutting machine. The cutter allows locksmiths to engrave a unique key as need. It supports to engrave numbers, letters and simple patterns.
The older model such as Condor Mini Plus or Dolphin XP005 is not available for this feature currently.
How to engrave a unique key blank?
Step1. Insert the engraving cutter and key blank.
Install the key blank on M5 clamp.
The vertex cannot be occluded by the key blank.
Please use special engraving cutter.
Step2. Send the picture to be cut to Condor XC-Mini Plus II.
- Pair XC-Mini Plus II with smartphone via Bluetooth(Bluetooth >> Pair new device);
- Ensure the picture is in PNG format with transparent background;
- Select picture to send.
Step3. Choose the picture and start to engrave.
Key blank engraving >> OK >> Add pictures >> Adjust the image to appropriate position
You can adjust its engrave spacing & engraving depth.
Press “Start engraving” after finished.
Note: the first dot engraved will start from the highest point on the left of image.
Condor Mini Plus II will starts engraving automatically.
Just wait…
Engraving completed.
This is how to use Condor XC-Mini Plus II machine to do key blank engraving function.