W212 test password…ok
“i test password from 212 new model super
good tool need pay 2 tokens
need 10 min all ok”
W212 all key lost…ok
“can do all key lost on w212.
No tool can do it even Mehaco or nec pro51.”
2010 w212 all key lost…ok
“2010 w212 is fbs3.. so all keys lost sure is possible on this model..”
read data 210 204 211 with obd 2
“i test read data with obd2 210 k line working and 204 & 211 car read with obd 2
Ps. read eis via obd for W211 require gateway connected”
W906 read EIS
“currently support W906, i read eis”
W204 renew EIS
“renew eis(w204)without working key,only need key pass.&erased pass.”
W204 renew EIS change ESL
“renew EIS of W204, and then change new ESL( programming new ESL)”
just click on Personalize W204 ESL, it auto adapt with EIS.
W204 all key lost
W204 all key lost i did, steps i follow:
(should buy a new EIS first)
1.Read EIS data via obd,then Save EIS data
2.adapt ESL:Read ESL data->Get Erase Password->Renew ESL
3.Change new EIS, Load EIS data(step1)->write Key Password(enter manually and at random)->Write EIS data
4.Personalize W204 ESL
5.Load EIS data(with Key Password)->Prepare Key File
6.Input new Key to device IR reader->Load Key file->write
7.Insert new Key to EIS->EIS will learn the new key->key learn success
V57 via NEC adapter support read and renew
“MI and nec prog 57 get password from ezs when all KEY l’ost”
Failed:
cannot support FBS4 type for part of 2014 2015 model
“Parts of 2014 & Mostly model of 2015 (and after 2015)is FBS4,currently cannot support FBS4 type.
User can Auto detect the EIS.if can detect the type but can’t read the EIS data,should be FBS4.
W204 facelift has fbs4 and it comes without esl/elv so another way to distinguish it”
“I can’t read rom57”
V57 via NEC adapter not support write currently, only support read and renew
“I test nec soket for reading KEY ROM 57 no problem”
just when need write not possible
via Ir Is ok
“Got mine today read the key in the IR as V57. Removed the NEC chip from the key and placed it SSOP adapter and software would not read it. Kept saying “NEC Adaptor with wrong socket type”