Vag km+immo tool software free download
vag-km-immov1-8-2beta.zip (22.5M)
vag-km-immov1-8-2beta.zipvag-km-immo-tool-adding-dealer-key-with-tango.pdf (336.4K)
vag-km-immo-update-manual-english.pdf (212.8K)
vag-km-immo-tool-user-manual.pdf
Micronas obd tool (cdc32xx) has more authorization than VAG Km+immo, which means micronas obd tool (cdc32xx) only cover CDC32xx, but VAG Km+immo have more functions than micronas obd tool (cdc32xx).
FAQ:
Q:Hi,I bought this VAG KM+IMMO TOOL with NEC24c64 Authorization from you, but it can not make keys for my 2013 VW Jetta.
A:This tool usually correct mileage,instead of make keys.
Q:Is this item from the same manufacturer as super vag? They use the same software
A:Yes, VAG KM+IMMO TOOL works great, If some of the CDC32XX dash can't be supported in software, developer can add it while next update, just send us flash CDC32xx and 24C32 eeprom.
VAG KM IMMO Tool Problem with Pin Code 24C64
Q1: Hi I have a 1T0920881A Dashboard.
I have no problem changing kilometers or changing VIN number, but when I try to get the PIN number, the software give me a wrong pin code. This pin code does not allow to enter the IMMO, Can you help me?
I've checked the cable with 2 micronas clusters, and the PIN CODE given in both micronas (EOS2006 and EOS2008) were OK, but not with the NEC24C64, any suggestion????
A1: hello, PIN code for nec24c64 is used for key learning, can’t enter IMMO.
Q2: you said this pin code is for key learning, so, where can I enter this pin to key learning?Is it possible to read and change Serial key (CS) with this dashboard? And in the micronas?
A2: hello, there're two ways to add key, direct patch and key learning. When you add key with VAG KM+IMMO Tool, choose direct patching method, and display the PIN Code for other tools which need this PIN code for key learning. If you use VAG KM+IMMO Tool to add a key, you don't need the PIN code.
Q3:I used the PIN given for Key Learning with VCDS to program a new key and it failed
but I got to add a key directly with VAG KM+IMMO Tool ....
In a future, do you think it will be possible to get the PIN CODE to match a new cluster with the ECU with VAG KM+IMMO Tool?? Is it very complicated???
A3: for cdc32xx, this PIN code can be used for cluster swapping, but for NEC, it can't be used for cluster swapping now. We’re working on this.
A4 Year 2010 No Writing New Mileage
Q1: I have an Audi A4 year 2010.IMMO software and cable have the software; the tool reads the org mileage. But when I like to write a new mileage, it doesn’t work. Tool says no error. I have wait for 10min but no result.
A1: it needs a long time for searching on A4, wait 30 or more min...
Q2: but he found the org mileage. When I click write new mileage, I must wait and I don’t see a result. I don't see a work time or anything.
So next work on this mileage, I have tested on an Audi a4 year 2010, the same problem. The software found the org mileage and I give a new mileage to write. Info connects with ECU. I wait 1 hour, but no result.
I have tested with 169 and 2, 03 I need support.
So I have again tested. Software works on car 1, 5 hours, and then the error. Writing km failed
A2: could you please send us the log file?
Notes:
1. Be sure to disable/uninstall anti-virus software
Please note,anti-virus software can flag up this item software as having a virus. This is a false positive and is due to the software containing the application file. So Before setup the device software, please disable/uninstall anti-virus software or install a more reliable free virus scanner! Our this item software is completely safe and virus free and all other virus scanners confirm this.
If the software data is destroyed or lost because you forget to disable/uninstall anti-virus software, please contact our customer service, we arrange to resend you CD or send you the software via internet.
2. Required windows operation system is windows XP
Be sure to setup and run the device software under windows XP. Otherwise the device software and program can be broken or it will fail to work.