How to Make Keys by Xhorse Condor XC Mini key cutting Machine


There are 3 ways to make keys or cut keys with Xhorse iKeycutter Condor XC-MINI automotive key cutting machine.

1. using Key Database
2. Key Duplication
3.Cut by Bitting (with or without original key).

keycutter-condor-xc-mini-key-cutting-machine

1 Using Key Database

To use the key database, you should know your key brand and supply your key code.

1) Select “Key Database” on the main menu

condor-xc-mini-key-database-1

2) Select car brand and Confirm

condor-xc-mini-key-database-2

3) Enter key code and confirm

condor-xc-mini-key-database-3

4) Enter key serial code and confirm

condor-xc-mini-key-database-4

5) The Bitting Code will be found in the database, and it will be shown on the screen, click on “Cut” button to start cut key

condor-xc-mini-key-database-5

 

2 Using Key Duplication

To use Key Duplication, you need to supply the car type and year of the production.

1) Select “Key Duplication” on the main menu

condor-xc-mini-key-duplication-1

2) Select vehicle maker and Confirm

condor-xc-mini-key-duplication-2

3) Select car type and Confirm

condor-xc-mini-key-duplication-3

4) Select detail car type and year of production, press Confirm

condor-xc-mini-key-duplication-4

5) Put the original Key in the properly position of the clamp display on the screen, then click on “Decode Key” button

condor-xc-mini-key-duplication-5

6) Verify bit code and modify bit code if needed, Click on “Cut” button to start cut key

condor-xc-mini-key-duplication-6


3 Using Cut by Bitting

Method 1: without original key in hand using Cut by Bitting

1) Select “Cut by Bitting” on the main menu

condor-xc-mini-key-cutting-machine

2) Select the Blank key and Confirm

condor-xc-mini-cut-by-bitting-2

3) Select key type and Confirm

condor-xc-mini-cut-by-bitting-3

4) Put the Blank Key in the properly position of the clamp display on the screen

5) Enter bitting and verify, then click on “Cut” to start

condor-xc-mini-cut-by-bitting-4


Method 2: existing the original key using Cut by Bitting

1) Select key blank and Confirm

condor-xc-mini-cut-by-bitting-5

2) Select key type and Confirm

condor-xc-mini-cut-by-bitting-6

3) Click on “Decode Key”, the found bitting will display on the screen

condor-xc-mini-cut-by-bitting-7

4) Verify bitting and modify bitting if needed, Click on “Cut” to start

condor-xc-mini-cut-by-bitting-8